Curtains are a very important element of interiors since they contribute to people’s comfort and need for privacy. One of the principles that should be observed when designing a functional and comfortable room is the regulation of the amount and type of light that enters the washroom. Optimum control of light is achieved through correct measurements and installation of drapes, and this makes the environment pleasant. This article addresses the subject of measuring drapes custom, a critical concern affecting the amount of light that gets into the restroom.

Significance of Light Control in Rest Rooms

The control of light in restrooms is considered relevant for several reasons, namely, privacy, comfort, and energy-saving. Lighting controls the extent of the brightness of the restroom so that it meets its intended purpose without being excessively bright or excessively dim. For example, when the amount of light is high it is uncomfortable for the eyes and may cause glare while on the other end of the scale, if the light is low, it is detrimental to the atmosphere of the room and it becomes almost impossible to perform certain tasks.

Choosing the Right Drapes

When choosing the right curtains for a restroom, some factors should be taken into consideration. The curtains must not only be appropriate for the décor of the restroom but should also allow the necessary amount of light exposure. Sheer drapes are the ones that allow light into the room but not strong direct sunlight while blackout drapes do not allow any light to pass through. These let in a lot of light and offer very little privacy. While some curtain blocks the light completely.

Measuring for Perfect Fit

It is for this reason that measures have to be taken to ensure that drapes operate to a certain level when it comes to light control. Inadequate drapes will have some weak spaces, and this would allow light to pass through and this negates the light control aspect. Here are the key steps to measure drapes accurately:

Determine the Mounting Type

Determine where about the window frame the drapes will be hung, inside or outside the frame. Inside mounts are neat and conservative, outside mounts give complete light control since the product covers the window.

Measure the Width

In the case of inside mounts, the measurements should be of the width of the window frame on top, at the middle, and on the bottom using the least of the three readings. When it comes to outside mounts, the width of the area that has to be covered is measured, usually with an added few inches on either side of the measurement.

Measure the Length

To measure for inside mounts, measure the height of the window frame from the top to the bottom sill. To determine the length for outside mounts, it is measured starting from the top of the mounting area down to a certain point, which can be below the windowsill for maximum control of light and outlook.

Consider Header Styles

The type of drape header for instance grommets, rod pockets, or pleated can cause some variation in the actual size. Do not forget the header style while calculating the length of the paper.

Custom Drapes Installation Tips

When you are sure of the accurate measurements the next important factor is the installation process which plays a vital role in controlling light. Here are some installation tips:

Use Quality Hardware

Purchase heavy-duty curtain rods and brackets which should be able to bear the weight of the curtains and also securely fixed.

Avoid Gaps

Make sure that the drapes go right to the floor and cover the whole area of the window. When installing outside mounts, ensure the drapes go over the frame and part of the wall to block light from appearing on the sides.

Double Up

It is recommended to use two rods, so the drapes can be layered using sheer and blackout materials. This kind of arrangement of the layers will allow flexibility of light control and it will be possible to change the layers to fit the level of light that you want to allow in and the level of privacy that you want to have.

Conclusion

Illumination control of restrooms is crucial to enable a conducive, private, and efficient area to be in. Measured control and correct selection of the curtains are the crucial factors in light regulation. Proper measures and the right installation can go a long way in improving the general outlook of your restroom and making it a much more comfortable place.